logo

Cliente in primo luogo, dedica, innovazione.

Fornitore dei materiali di fabbricazione & fondenti della muffa professionale del silicone di MC

Casa
Prodotti
Chi siamo
Fatory Tour
Controllo di qualità
Contattaci
Richiedere un preventivo
Casa ProdottiGomma liquida del silicone

Transparent Addition Cure RTV2 Liquid Silicone Rubber for Mold Making

Transparent Addition Cure RTV2 Liquid Silicone Rubber for Mold Making

  • Transparent Addition Cure RTV2 Liquid Silicone Rubber for Mold Making
  • Transparent Addition Cure RTV2 Liquid Silicone Rubber for Mold Making
  • Transparent Addition Cure RTV2 Liquid Silicone Rubber for Mold Making
  • Transparent Addition Cure RTV2 Liquid Silicone Rubber for Mold Making
  • Transparent Addition Cure RTV2 Liquid Silicone Rubber for Mold Making
Transparent Addition Cure RTV2 Liquid Silicone Rubber for Mold Making
Dettagli:
Luogo di origine: Cina
Marca: MC Silicone
Certificazione: SGS,REACH
Numero di modello: MCPLA-H30
Termini di pagamento e spedizione:
Quantità di ordine minimo: 240 kg
Prezzo: negotiable
Imballaggi particolari: 20 kg, 200 kg/tamburo
Tempi di consegna: 5-8 giorni lavorativi
Termini di pagamento: L/C,T/T,Western Union
Capacità di alimentazione: 4000 al giorno
Contatto
Tutti i prodotti
Gomma liquida del silicone (177)
Gomma di silicone della cura del platino (215)
Tin Cure Silicone Rubber (172)
Gomma del liquido del poliuretano (91)
Silicone Encapsulants (18)
Gomma di silicone della colata di vita (23)
Gomma da muffe di poliuretano (12)
Chiara epossiresina (27)
Olio siliconico dimetilico (17)
Mastice della muffa del silicone (36)
silicone elettronico di impregnazione (15)
muffa del silicone che fa materiale (11)
Silicone dello stampaggio ad iniezione (3)
Gomma di silicone di HTV (5)
Descrizione di prodotto dettagliata
Articolo n.: MCPLA-H30 Colore: Trasparente
Durezza: 30 Spiaggia A Rapporto di miscelazione: 10:1
Orario di lavoro: 90-120 minuti Tempo di polimerizzazione: 24 ore
Viscosità mista: 40000 cps Resistenza alla trazione: 6.2 MPa
Forza allo strappo: 28 N/mm Restringimento: 0,1%

Product Description

Transparent Addition Cure RTV2 Liquid Silicone Rubber for Ear Plug

Description of Transparent Addtion Cure RTV2 Silicone Rubber

RTV silicone rubber is a two component elastomeric cross-linking at room temperature. The polymerization can be accelerated by heat (max. 150 C). The silicone components are delivered as liquids, which once mixed and cured transform into a transparent, elastic and resistant material. Polymerization occurs without formation of heat.

Advantages of Transparent Addtion Cure RTV2 Silicone Rubber

1. Easy Curing: MCPLA-H40 polymerizes at room temperature (23C).
2. High Transparency
3. High tear and tensile strength
4. Long shelf life with low shrinkage

Applications of Transparent Addtion Cure RTV2 Silicone Rubber

Label manufacturing, Molding applications requiring low shrinkage, such as toys, jewelers, automotive, rapid prototyping etc.

Transparent Addition Cure RTV2 Liquid Silicone Rubber for Mold Making 0
Instructions for making silicone molds

1. Mixing the two components
According the mixing ratio 10: 1 weighting part A and B, the two components may be thoroughly mixed either by hand or using a low speed electric to minimize the entrance of air and to avoid any temperature increase.
Note: It is also possible to use a special mixing and dispensing machine for the two silicone components, further information is available upon request.

2. Molding
The mixture should be degassed preferably at 30 to 50 mbar to eliminate any entrapped air. If a dispensing machine is used, the two components are degassed separately prior to mixing. The silicone mixture expands to 3 to 4 times of its initial volume and bubbles rise to the surface. The bubbles progressively disappear and the mixture returns to its initial volume after 5 to 10 minutes. Wait a few minutes to complete the degassing and then flash the vacuum. The silicone is ready for pouring, either by gravity or under low pressure.
Note: Flashing the vacuum once or twice accelerates the degassing. It is recommended to use a container with a high diameter/height ratio(3 to 4 times of the initial volume)

3. Polymerization
The curing may be slowed down at lower temperature or accelerated by applying heat.
Note: In general contact with certain materials can inhibit the cross linking of RTV.
Natural rubbers vulcanized with sulfur
RTV elastomeric is catalyzed with metal salts, e. G. Tin compounds
PVC stabilized with tin salts and additives
Epoxy catalyzed with amines
Certain organic solvents, such as Ketones, alcohols etc.

In case of doubt, it is recommended to test the substrate by applying a small quantity of the mixed silicone on a restricted area.

Storage and shelf life of Transparent Addtion Cure RTV2 Silicone Rubber

Silicone RTV must be used within 12 months from the manufacturing date. Beyond this date, MC silicone no longer guarantees the products confirms with the sales specification. 

Prodotto Tag:

gomma di silicone liquida per la fabbricazione della muffa,

Gomma del liquido del silicone della cura di condensazione,

gomma di modellatura del silicone ad alta temperatura

Dettagli di contatto
MINGCHENG GROUP LIMITED

Persona di contatto: Ms. Julie

Telefono: +86-13537275098

Fax: 86-769-82696808

Invia la tua richiesta direttamente a noi (0 / 3000)

Colleghi online
Mappa del sito
Prodotti
Casa
politica sulla riservatezza | La CINA buon qualità Gomma liquida del silicone fornitore.
© 2021 - 2026 MINGCHENG GROUP LIMITED. All Rights Reserved.

No.2, strada di Zhouliao, zona industriale di Langzhou, Changping, Dongguan, Guangdong, Cina

julie@mcsilicone.com

Sito mobile

Voglia conoscere più circa noi? Contattici appena