logo

Cliente in primo luogo, dedica, innovazione.

Fornitore dei materiali di fabbricazione & fondenti della muffa professionale del silicone di MC

Casa
Prodotti
Chi siamo
Fatory Tour
Controllo di qualità
Contattaci
Richiedere un preventivo
Casa ProdottiGomma liquida del silicone

5 Shore A RTV 2 Addition Cure Silicone Mold Rubber for Strawberry Candy

5 Shore A RTV 2 Addition Cure Silicone Mold Rubber for Strawberry Candy

  • 5 Shore A RTV 2 Addition Cure Silicone Mold Rubber for Strawberry Candy
  • 5 Shore A RTV 2 Addition Cure Silicone Mold Rubber for Strawberry Candy
  • 5 Shore A RTV 2 Addition Cure Silicone Mold Rubber for Strawberry Candy
  • 5 Shore A RTV 2 Addition Cure Silicone Mold Rubber for Strawberry Candy
  • 5 Shore A RTV 2 Addition Cure Silicone Mold Rubber for Strawberry Candy
5 Shore A RTV 2 Addition Cure Silicone Mold Rubber for Strawberry Candy
Dettagli:
Luogo di origine: Cina
Marca: MC-Silicone
Certificazione: SGS,REACH
Numero di modello: MCPLA-L05
Termini di pagamento e spedizione:
Quantità di ordine minimo: 240 kg
Prezzo: negotiable
Imballaggi particolari: 5 kg, 10 kg, 20 kg, 200 kg/ tamburo
Tempi di consegna: 5-8 giorni di lavoro
Termini di pagamento: L/C, T/T, Western Union
Capacità di alimentazione: 4000 al giorno
Contatto
Tutti i prodotti
Gomma liquida del silicone (175)
Gomma di silicone della cura del platino (215)
Tin Cure Silicone Rubber (172)
Gomma del liquido del poliuretano (91)
Silicone Encapsulants (18)
Gomma di silicone della colata di vita (23)
Gomma da muffe di poliuretano (12)
Chiara epossiresina (27)
Olio siliconico dimetilico (17)
Mastice della muffa del silicone (36)
silicone elettronico di impregnazione (15)
muffa del silicone che fa materiale (11)
Silicone dello stampaggio ad iniezione (3)
Gomma di silicone di HTV (5)
Descrizione di prodotto dettagliata
Articolo n.: MCPLA-L05 Rapporto di miscelazione: 1: 1
Ora di lavoro: 30-40 minuti Tempo di cura: 4-6 ore
Durezza: 5 riva A Viscosità mista: 3500 cps
Resistenza alla trazione: 3,2 MPa Lacerare la forza: 12 N/mm
Restringimento: 0.1%
Evidenziare:

5 Shore A silicone mold rubber

,

RTV 2 addition cure silicone

,

strawberry candy mold rubber

Product Description

5 Shore A RTV 2 Addition Cure Silicone Mold Rubber For Strawberry Candy

5 Shore A RTV 2 Addition Cure Silicone Mold Rubber for Strawberry Candy 0

Technical datasheet of 5 Shore A RTV 2 Addition Cure Silicone Food Grade Mold Rubber 
Item No. MCPLA-L05
Color Translucent/can be customized
Viscosity ( cps,approx.) 3500-6000
Mix ratio (A:B) 1:1
Working time(at 25ºC ,minutes) 30-40  (can be adjusted)
Curing time(at 25ºC,hrs,approx.) 4-6  (can be adjusted)
Hardness Shore A(after 24 h) 5
Tensile Strength(Mpa,after 24 h) 3.2
Elongation(%) 650
Tear Strength(N/mm) 12
Linear Shrinkage (%) 0. 1

Two-component addition type silicone rubber is a two-part, platinum-catalyzed, liquid silicone system that cures (RTV) to rubber elastomer . The polymerization can be accelerated by heat. The silicone components are delivered as liquids,which once mixed and cured into a transparent, elastic and resistant material. Polymerization occurs without formation of heat.

Characteristics of 5 Shore A RTV 2 Addition Cure Silicone Food Grade Mold Rubber
Convenient to operate because the RTV property
Easy to mix due to the low viscosity (4000~6000Cps) 
High duplication because of high tear and tensile strength
Long shelf life with low shrinkage
Can be accelerated for rapid cure

Application of 5 Shore A RTV 2 Addition Cure Silicone Food Grade Mold Rubber
1.A range of materials can be cast into the cured silicone mold:
polyurethane and other reactive resins
Small pieces of cement,plaster,concrete products.
Food like chocolate,fondants
Wax,candle,soap;
Low melt metal
2.casting body parts,shoe insole,cloth label,texture coating.

5 Shore A RTV 2 Addition Cure Silicone Mold Rubber for Strawberry Candy 1

Instructions of 5 Shore A RTV 2 Addition Cure Silicone Food Grade Mold Rubber

1. Mixing the two components
According the mixing ration 1:1 weighting A and B, the two components may be thoroughly mixed either by hand or using a low-speed electric to minimize the degassing of bubbles and to avoid any temperature increase.
Note: It is also possible to use a special mixing and dispensing machine for the silicone components, further information is available upon request.

2. Moulding
The mixture should be degassed preferably at 30 to 50 mbar to eliminate any entrapped air. If a dispensing machine is used, the two components are degassed separately prior to mixing. The silicone mixture expands to 3-4 times of its initial volume and bubbles rise to the surface. The bubbles progressively disappear and the mixture returns to its initial volume after 5 to 10 minutes. Wait a few minutes to complete the degassing and then flash the vacuum. The silicone is ready for pouring, either by gravity or under low pressure.
Note: Flashing the vacuum once or twice accelerates the degassing. It is recommended to use a container with a high diameter/height ratio (3 to 4 times of the initial volume)

3. Polymerisation
The curing may be slowed down at lower temperature or accelerated by applying heat.
Note:
1.Contamination from sulfur (e.g., sulfur-based clay), amines, tin compounds, cured polyester resin, some paints and some silicone rubbers may inhibit surface cure of platinum-cured rubbers.
2.Apply a release agent, Although not usually necessary, a release agent will make demolding easier when casting into most surfaces.

Note: It is strongly recommended that entrapped air be removed in a vacuum chamber, allowing the mix to completely expand and then collapse. After a further 1-2 mins under vacuum, the mix should be inspected and can be used if free of air bubbles. A volume increase of 3-5 times will occur on vacuum de-airing the mixture. So a suitably large container should be chosen.

Storage of 5 Shore A RTV 2 Addition Cure Silicone Food Grade Mold Rubber

When the platinum RTV-2 Silicone Rubber is stored at or below 30 ° C (85° F) in the original unopened containers, RTVsilicone base and C520 curing agent have a usable life of 12 months from the date of production.

Packaging of 5 Shore A RTV 2 Addition Cure Silicone Food Grade Mold Rubber

1kg=504kg pallet, 5kg/drum=600kg/pallet, 10kg, 20kg per plastic drum=480kg per pallet
200kg per drum, 800kg per pallet. Other types of package, please check with our sales representative.


5 Shore A RTV 2 Addition Cure Silicone Mold Rubber for Strawberry Candy 2
5 Shore A RTV 2 Addition Cure Silicone Mold Rubber for Strawberry Candy 35 Shore A RTV 2 Addition Cure Silicone Mold Rubber for Strawberry Candy 4 



5 Shore A RTV 2 Addition Cure Silicone Mold Rubber for Strawberry Candy 5
Professional factory of RTV2 silicone:
We are manufacturer, and specialized in manufacturing different hardness, different viscosity silicone rubber series, we are competitive in price with good quality.
Should you have any question, please feel free to contact us.


 

Prodotto Tag:

gomma di silicone liquida per la fabbricazione della muffa,

Gomma del liquido del silicone della cura di condensazione,

gomma di modellatura del silicone ad alta temperatura

Dettagli di contatto
MINGCHENG GROUP LIMITED

Persona di contatto: Ms. Julie

Telefono: +86-13537275098

Fax: 86-769-82696808

Invia la tua richiesta direttamente a noi (0 / 3000)

Colleghi online
Mappa del sito
Prodotti
Casa
politica sulla riservatezza | La CINA buon qualità Gomma liquida del silicone fornitore.
© 2021 - 2026 MINGCHENG GROUP LIMITED. All Rights Reserved.

No.2, strada di Zhouliao, zona industriale di Langzhou, Changping, Dongguan, Guangdong, Cina

julie@mcsilicone.com

Sito mobile

Voglia conoscere più circa noi? Contattici appena